NSMPPT90 90A 12/24/36/48V MPPT solar charge controller

NSMPPT solar charge controller is multi-stage Maximum Power Point Tracking (MPPT) photovoltaic battery charge controller with our own technology. It’s main topology adopts in Buck conversion circuit, and uses MCU to adjust the solar panels working point intelligently in order to make the solar panels output its maximum power. When the circumstances change, the working point of solar panels deviate from the maximum power point, MCU will adjust the solar panels working point based on MPPT calculation to make the solar panels back to the maximum power point again. Compared with PWM controller, MPPT controller can increase the output power of solar panels by 5%~30%. The output power increasing proportion is affected by the factors such as solar panels property, humidity and light intensity. The controller uses wall-mount installing. Connecting terminal makes the wiring area bigger and wiring loss less.

  • Advanced MPPT maximum power point tracking technology, tracking efficiency not less than 99.5%
  • Using high-quality components to improve system performance, the maximum conversion efficiency up to 97%
  • Fast maximum power point tracking speed, ensuring tracking efficiency while tracking
  • Accurate Identification and Tracking of the Maximum Power Point
  • Reliable maximum PV array input power Automatic limit function to ensure no overload under any conditions
  • Wide PV array maximum power point operating voltage range
  • The use of LCD design, dynamic display equipment operating data and work status
  • Accumulated Charge and discharge recording function
  • Various load control modes: manual mode, light control mode, dual time mode and debug mode
  • Adaptable to Sealed,Gel,Flooded and other customized battery type
  • Uses the standard MODBUS communication agreement based on the RS232 \ RS485 communication main line, maximizes satisfies the different demand
Model NSMPPT90
Input Max PV voltage 150V
Max charging current 90A
Output System voltage 12V/24/36/48V
Max battery voltage 24V/32/48/64V
Max load current 10A
Own consumption 12mA
Charging control mode 3-stages(MPPT,Absorption,Float)
Float charge 13.8V/27.6V/41.4V/55.2V
Absorption charge 14.4V/28.8V/43.2V/57.6V
Load

disconnection(LVD)

10.8V/21.6V/32.4V/43.2V
Load reconnection(LVR) 12.6V/25.2V/37.8V/50.4V
Temperature compensation -4mV/ cell/ °C
Battery type Lead acid(Gel, Sealed,Flooded)
Other Maximum efficiency 97%
interface LCD, buttons
Cooling style Passive cooling
Maximum wire size 25mm²
Ambient temperature -10 to +50 °C
Storage temperature -20 to +60 °C
Humidity 0 to 90%, no condensation
Dimension 376.5mm×258mm×110mm
Net weight(kgs) 6.4
Grounding Positive grounding

 

 

 

Reviews

There are no reviews yet.

Be the first to review “NSMPPT90 90A 12/24/36/48V MPPT solar charge controller”

Your email address will not be published. Required fields are marked *